What other models can we expect from the VP mold?

General Chat Area
NO Advertising Wanted / For Sale, etc.

Moderator: ccforum

JJR355
Posts: 14
Joined: Wed Apr 08, 2015 6:35 pm

Re: What other models can we expect from the VP mold?

Post by JJR355 » Mon Jun 13, 2016 9:20 pm

Staggering. Just staggering.

User avatar
doug05
Posts: 5
Joined: Sun Sep 02, 2007 8:54 am

Re: What other models can we expect from the VP mold?

Post by doug05 » Wed Aug 31, 2016 5:27 pm

So it appears that now the Skaife Bathurst VP has been cancelled!! Thanks for nothing, again, CC :x

Why bother announcing these models if they are not going to be made? Sure would be nice to have some variety rather than rehashed Brock VC/VHs all the time...
RIP Peter Brock

toy032
Posts: 236
Joined: Sat Sep 27, 2008 9:45 pm

Re: What other models can we expect from the VP mold?

Post by toy032 » Wed Aug 31, 2016 9:06 pm

The Skaife/Richards VP!!! you cancel it???? WTF CC?? :?:

The VP is one of the best molds you have created

HRT_fan
Posts: 9
Joined: Mon Aug 06, 2007 11:25 am
Location: Adelaide

Re: What other models can we expect from the VP mold?

Post by HRT_fan » Thu Sep 01, 2016 9:31 am

So I would assume all of you pre-ordered it then

HRT_fan
Posts: 9
Joined: Mon Aug 06, 2007 11:25 am
Location: Adelaide

Re: What other models can we expect from the VP mold?

Post by HRT_fan » Thu Sep 01, 2016 9:31 am

* duplicate

User avatar
doug05
Posts: 5
Joined: Sun Sep 02, 2007 8:54 am

Re: What other models can we expect from the VP mold?

Post by doug05 » Sat Sep 03, 2016 5:43 pm

Certainly did, as with the 94 Championship Winner too
RIP Peter Brock

HRT_fan
Posts: 9
Joined: Mon Aug 06, 2007 11:25 am
Location: Adelaide

Re: What other models can we expect from the VP mold?

Post by HRT_fan » Mon Sep 05, 2016 5:05 pm

Certainly did, as with the 94 Championship Winner too
That's good but obviously not many others did hence the cancellation.

JJR355
Posts: 14
Joined: Wed Apr 08, 2015 6:35 pm

Re: What other models can we expect from the VP mold?

Post by JJR355 » Mon Sep 12, 2016 8:17 pm

Why would you make a GMS runner up model if you can't get enough pre orders for an ATCC winner (which is a far more significant model)? Obviously CC's attitude is affecting their sales/pre orders.

And yes, I pre ordered both. Hopefully Biante do a VP mould soon. They seem to be willing and able to do small runs of cars.

JJR355
Posts: 14
Joined: Wed Apr 08, 2015 6:35 pm

Re: What other models can we expect from the VP mold?

Post by JJR355 » Mon Apr 03, 2017 7:54 am

So a Lowndes VP is announced. Is it all we are going to get? Rehash of Brock and HRT cars? Some of the best liveries seen in touring cars were off the VP. This is ridiculous. Biante can do runs of 800 and less, why can't CC?

Road Rooster
Posts: 9
Joined: Fri Sep 27, 2013 1:21 pm

Re: What other models can we expect from the VP mold?

Post by Road Rooster » Wed Apr 05, 2017 10:45 am

JJR335,
You dont look on the CC website very often, if you did you will see that the last 2 months releases were runs of 750.

JJR355
Posts: 14
Joined: Wed Apr 08, 2015 6:35 pm

Re: What other models can we expect from the VP mold?

Post by JJR355 » Thu Jun 01, 2017 1:15 pm

So then why are the VP models being cancelled if CC are capable of doing small runs?

I don't take much credence in the CC website when things are listed and removed frequently.

waynestr
Posts: 210
Joined: Tue Jun 16, 2009 8:55 pm

Re: What other models can we expect from the VP mold?

Post by waynestr » Thu Jun 01, 2017 5:46 pm

ccforum wrote:
Wed May 25, 2016 12:58 pm
Hi Guy's,
As Numark83 has pointed out, we plan to produce the 1993 Bathurst 2nd place car driven by Mark Scaife and Jim Richards. This car is expected to be released in the 4th quarter, later this year, with an expected scheduled production of 1000 pieces.

Kind Regards
CC
Haven't Biante already done this one, and you can't even sell it for half of what you paid for it?

Drew02
Posts: 8
Joined: Fri Feb 09, 2007 12:52 pm
Location: Sydney

Re: What other models can we expect from the VP mold?

Post by Drew02 » Fri Jun 02, 2017 8:07 am

waynestr wrote:
Thu Jun 01, 2017 5:46 pm
ccforum wrote:
Wed May 25, 2016 12:58 pm
Hi Guy's,
As Numark83 has pointed out, we plan to produce the 1993 Bathurst 2nd place car driven by Mark Scaife and Jim Richards. This car is expected to be released in the 4th quarter, later this year, with an expected scheduled production of 1000 pieces.

Kind Regards
CC
Haven't Biante already done this one, and you can't even sell it for half of what you paid for it?
No the one Biante have already released is the 1995 VR Model.

waynestr
Posts: 210
Joined: Tue Jun 16, 2009 8:55 pm

Re: What other models can we expect from the VP mold?

Post by waynestr » Fri Jun 02, 2017 9:10 pm

Ok Thanks for clearing that up. I still have one of them, and have only taken it out to apply the decals. Nice model but not popular.I suspect the 1993 one will be as "popular"? as the 95 one.

JJR355
Posts: 14
Joined: Wed Apr 08, 2015 6:35 pm

Re: What other models can we expect from the VP mold?

Post by JJR355 » Thu Jun 08, 2017 10:08 am

Exactly why I questioned it's scheduling to be produced when they couldn't 'pre sell' enough of the 1994 ATCC winner, which is much more significant.

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest